AVS Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
hey guys/gals,
I have a full lutron ra2 system, with essentials 8.2 software, and I want to install hopefully a wireless security system in my home, but I do want to have it integrated with my lutron system

does anyone know what systems are out there and compatible with the lutron ra2 system using the vcrx input and the aux output on the security system?
thanks
 

·
Registered
Joined
·
6,017 Posts
Lutron: "Alarm.com, DSC, ELK, HAI, and Honeywell platforms are supported." But, I think most would work.

App note for general integration: http://www.lutron.com/TechnicalDocumentLibrary/048362a Interfacing RA2 with Security.pdf

App note for Honeywell Vista http://www.lutron.com/TechnicalDocumentLibrary/048451 Interfacing RA2 with Honeywell Vista.pdf

Elk M1 and HAI would each allow for additional programming options which RA2 lacks (if/then programming), providing some of the functionality that HomeWorks QS provides.

If you have another controller to provide the logic, DSC or Vista would probably be cheaper and easier.
 

·
Registered
Joined
·
21 Posts
Discussion Starter #3
Lutron: "Alarm.com, DSC, ELK, HAI, and Honeywell platforms are supported." But, I think most would work.

App note for general integration: http://www.lutron.com/TechnicalDocumentLibrary/048362a Interfacing RA2 with Security.pdf

App note for Honeywell Vista http://www.lutron.com/TechnicalDocumentLibrary/048451 Interfacing RA2 with Honeywell Vista.pdf

Elk M1 and HAI would each allow for additional programming options which RA2 lacks (if/then programming), providing some of the functionality that HomeWorks QS provides.

If you have another controller to provide the logic, DSC or Vista would probably be cheaper and easier.
ok so I've been trying to do some research with wireless systems and the dats sheet you provided is a bit confusing for the technical specs when it comes to how many volts and ma can be used,
I was looking at the honeywell vista 20p and I was hoping it would work can you help me out and let me know if the aux output on the vista will work with the vcrx input for ra2? all I want to do is use the function for the full/flash mode on the vcrx
thanks
 
1 - 3 of 3 Posts
Top