[[email protected]]

HI GUYS


MY CRT PROJECTOR WONT LIGHT UP.

I HAD PROBLEM ,1ST I THOUGHT WAS THE HVPS BUT NOW THE CRT S START AGAIN.

I CANNOT GET ANY SIGNAL VIA THE INPUT MODULE.

I DID CHECK OUT EVERYTHING BUT NO SIGNAL BY NO INPUT EG S VIDEO-

COMPOSITE OR RGB INPUT.

I CAN GO THROUGH THE MENU WITH THE GREEN CRT.

DID ALSO CHECK FOR INPUT CONNECTION VIA THE MENU, BUT NO VIDEO

SIGNAL.

CAN YOU GUYS GIVE ME AN IDEA AS YOU HAVE DONE IN THE PAST FOR WHICH I AM VERY GRATEFULL.

ALSO WHO DOES HAVE AN USED ACON MODULE AGAINST A REASONABLE PRICE?


PLSE LET ME KNOW


REGARDS


BOB

 

[Tim in Phoenix]

Say Bob


Do you see on-screen text and test patterns generated by the projector? Did you select the input or channel where your source or sources are connected? If you push ** on the remote control, do you see scan rates of the sources displayed?

 

[overclkr]

Quote:

Originally posted by [email protected] HI GUYS MY CRT PROJECTOR WONT LIGHT UP. I HAD PROBLEM ,1ST I THOUGHT WAS THE HVPS BUT NOW THE CRT S START AGAIN. I CANNOT GET ANY SIGNAL VIA THE INPUT MODULE. I DID CHECK OUT EVERYTHING BUT NO SIGNAL BY NO INPUT EG S VIDEO- COMPOSITE OR RGB INPUT. I CAN GO THROUGH THE MENU WITH THE GREEN CRT. DID ALSO CHECK FOR INPUT CONNECTION VIA THE MENU, BUT NO VIDEO SIGNAL. CAN YOU GUYS GIVE ME AN IDEA AS YOU HAVE DONE IN THE PAST FOR WHICH I AM VERY GRATEFULL. ALSO WHO DOES HAVE AN USED ACON MODULE AGAINST A REASONABLE PRICE? PLSE LET ME KNOW REGARDS BOB

Hi Bob,


Although I cant help you with your problem, YOU SHOULDN'T SCREAM!!!!!


:^)


Cliff