AVS Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
4,815 Posts
are you sure you know what your doing? BAT81 isn't a location on the board, D57 is a BAT81 diode.
http://www.futurlec.com/Diodes/BAT81pr.shtml


and it's only found on the 07P HDM manufactured over a 4 month period in 1995. Are you sure that's the actual board you have?

The DOM is on the front, white sticker next to the power chord.
 

·
Registered
Joined
·
53 Posts
Discussion Starter · #3 ·
I misread the tech bulletin. The way it was printed (replace diode D7, BAT81) I took it replace two diodes. I am a older electronic tech. guess my reading skills are slipping.

It is the 07P board.
 

·
Registered
Joined
·
4,815 Posts

Quote:
Originally Posted by hjhjr  /t/1469938/marquee-9500-hdb#post_23246687


I misread the tech bulletin. The way it was printed (replace diode D7, BAT81) I took it replace two diodes. I am a older electronic tech. guess my reading skills are slipping.

It is the 07P board.
ok, but it would have to be a very rare board to have been made over that 4 month period. The 07 HDM was made for 4+ years.

Is it really folding? if it's clipping a couple of inches off each side of the image then that's normal without a video scaler. Using a video processor and lengthening the porch sizes from Blue ray and DVD will display the entire image, otherwise you lose a little on the sides.
 
1 - 4 of 4 Posts
Top