Just guessing here, but are you sure that your focus coil is properly oriented - i.e. rotated to the proper position so that the controls act in the proper direction?
-
Get an exclusive sneak peek into our new project. >>> Click Here
-
Our native mobile app has a new name: Fora Communities. Learn more.
Marquee astigmation
Changing zone astigmation values on the marquee is not working properly. That is, when I change values for top left, top middle, top right zones, it got no effect on the blob. Changing middle bottom zone affect all zones. Changing middle left zone affect left top, left middle, left bottom zone. Changing bottom left zone affect bottom left, and top left zones. And so on... Focus zones behave weirdly as well.
Do you think something might be wrong with the Astig focus board?
Tkx.
Do you think something might be wrong with the Astig focus board?
Tkx.
- Status
- Not open for further replies.
1 - 6 of 6 Posts
Hello
Is that on one color or all three? There may be timing issues with waveforms from the control board or DPB.
Is that on one color or all three? There may be timing issues with waveforms from the control board or DPB.
Tim, the issue is for all 3 tubes.
if there are faulty boards, can I repair them or should I buy new one. if so, from where?
Thanks.
if there are faulty boards, can I repair them or should I buy new one. if so, from where?
Thanks.
Quote:
Turning Focus coil on the marquee should have no effect.
Tim, The problem is on the three tubes. If some boards are faulty, are they repairable. If not, where I can I get new one? Focus zone addressing is working fine and so only the astigmation part is faulty.
Thanks.
| Originally Posted by Ridebreck Just guessing here, but are you sure that your focus coil is properly oriented - i.e. rotated to the proper position so that the controls act in the proper direction? |
Tim, The problem is on the three tubes. If some boards are faulty, are they repairable. If not, where I can I get new one? Focus zone addressing is working fine and so only the astigmation part is faulty.
Thanks.
Say Nooob
The next chore is either troubleshooting with a scope or to swap in known good boards until the problem is isolated. Did you put Focus to 100 for this adjusting?
The next chore is either troubleshooting with a scope or to swap in known good boards until the problem is isolated. Did you put Focus to 100 for this adjusting?
1 - 6 of 6 Posts
- Status
- Not open for further replies.
AVS Forum
A forum community dedicated to home theater owners and enthusiasts. Come join the discussion about home audio/video, TVs, projectors, screens, receivers, speakers, projects, DIY’s, product reviews, accessories, classifieds, and more!
Full Forum Listing
Top Contributors this Month
View All
WilliamR
940 Replies
BASSAHOLIC
514 Replies
bass addict
401 Replies
Recommended Communities
