AVS Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
620 Posts
Discussion Starter · #1 ·
Guys,


Setting up my new 8500..puh:rolleyes:

Guess I need an professional when the PJ are to be permanent mounted ;)


Need an advice: When connected to the HTPC, the green and blue are showing the picture ok, but the red are off!


When pressing the color button on the remote, the status bar are showing in all tubes, but in the red the only thing it shows are the status bar (the R/G shows both status and picture from the HTPC desktop).


Have checked the on/off function on the remote where the color button are pressed, and the 1,2,3... are used for on/off on each tube.


Any suggestion?


Best regard's

Rolf
 

·
Registered
Joined
·
3,557 Posts
you have a bad connection on your red line input. Check and/or replace as necessary. For future reference, whenever you have internal video (self generated text/menus/test patterns) but no input video on a given CRT, the problem is source or cable related 99.99% of the time. Very rarely is it a projector problem.
 

·
Registered
Joined
·
620 Posts
Discussion Starter · #3 ·
Checked the red BNC plug. Had tu turn off the plastic cover, and found an bed connection. Reinserted and the R/G/B are all ok!

-Rolf
 

·
Registered
Joined
·
620 Posts
Discussion Starter · #4 ·
I will run "spellCheck" next time ;)
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top