AVS Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
148 Posts
Discussion Starter · #1 ·
I am looking for some help in finding "micro" sized puck lighting to be recessed in the toe kick of the bar in the theater.


I am looking for a puck or disk 1" or less in diameter at a reasonable price. Dimmable is prefered but LED will work if that is the only option.


We have considered rope lighting and other options but do not like the look nearly as much. Also punching a punch of holes for fiber optics in a stainless steel toe kick does not sound like much fun.


Any help would be appercaited.
 

·
Registered
Joined
·
148 Posts
Discussion Starter · #4 ·
Thanks for pointing out the thread. The button lights used on the risers look like they will be perfect.


I have been to the website he got the lights from ( http://theledlight.com/ ) but did not see them listed. Now that I have some more information I should be able to track down the lights.
 

·
Registered
Joined
·
148 Posts
Discussion Starter · #5 ·
Thanks for the direct link to the lights.


I looked through the thread some more and these lights are going to be perfect. The wife likes the way they look, they are the right size, and are dimmable. White is not the first choice of finish but that is easy to correct with a little metallic paint.


Just need to figure out if we want 20, 30, or 40 degree lights.


Thanks for the help!
 

·
Registered
Joined
·
148 Posts
Discussion Starter · #7 ·
The Pegauses lights look nice but I needed 12 lights and they get expensive quickly.


I ordered the Northstar lights and recieved them today. This weekend I will have to take some sand paper and a little paint to make them look a little better. Under the bar they will not be very noticible (the light will but not the lights).


If the fixtures were going to be more obvious I would probably have gone with Pegauses.
 
1 - 7 of 7 Posts
Top