AVS Forum banner
1 - 1 of 1 Posts

Premium Member
3,519 Posts
Discussion Starter · #1 ·
I am selling my MiniDSP 2x4 (unbalanced). I recently upgraded my subwoofers to (4) SI 18 Diy subs and now my subs only need 2 PEQ filters which my UMC-200 can do. This worked wonders when I had two PSA XV-15s.

Shipping and paypal fee included. This sells new with the plugin for $135 and usually takes a 1-2 weeks to receive from Hong Kong. I can ship next day.

The miniDSP 2x4 in a box is a flexible pocket size DSP processor with 2 x analog IN, 4 x analog OUT. Combined with a plug-in software for programming, one can configure the on board Audio processing filters real time from a PC or Mac environment. Once the board configured, the device operates standalone and doesn't require a computer anymore. For more information on potential applications, please check the application section of our website.

Technical Specifications

- 28/56bit DSP Engine

- 24 bit ADC/DAC resolution

- 48kHz sampling rate

- Unbalanced inputs switchable with a jumper between 0.9Vrms and 2Vrms

- Unbalanced outputs: Max 0.9Vrms

- Digital Audio input/outputs via I2S

- Nichicon Muse Audiophile capacitors

- Volume control by potentiometer on 3pin header

- 5pin, 2.54mm pitch header for panel mount USB connector

- Plug&Play USB driver and real time Software configuration using miniDSP plug-ins

- Device does not required a PC once configured

- USB self powered device and wide range of DC power options (4.5 to 24VDC)
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.