AVS Forum banner
  • Get an exclusive sneak peek into our new project. >>> Click Here
  • Our native mobile app has a new name: Fora Communities. Learn more.

Minor problem with my PB-13 Ultra

759 Views 2 Replies 3 Participants Last post by  JetJockey1
Hey guys, it seems there is a slight vibration/rattle coming from the ports at higher volume. I have no idea what it could be anymore. I figured it were the black and red wires running by the center port. Sonic boom audio (canada) asked me to take the amp off and look inside and tape the wires to the wood frame. It didn't fix my issue unfortunately. Anyone have any idea what it could be?
1 - 3 of 3 Posts
Besides inspecting for anything loose inside, also check the rigidity of the ports. The outer ones angle inward above the bend. Make sure these are not touching the braces and can't wiggle enough to touch the braces.
E mail SVS support, they are very fast and very helpfull by all accounts. Hope it gets worked out quickly, good luck.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top