AVS Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
576 Posts
Discussion Starter · #1 ·
-I have a new Momitsu V880, latest firmware, and a JVC D-ILA G11

-I am outputting DVI to VGA to RGBHV. This allow me to output a 720P or 1080i image.

-1080i selected in the V880 menu outputs an image tht is about 1/6 too big for the screen (left-hand side is cut off some)

-I can select 720P in the V880, and then force the image to my G11 by selecting 720P instead of "Auto". This seems to display a correct-sized image.

-I want to use the custom DVI menu

-I used the tool from http://www.avsforum.com/avs-vb/showt...hreadid=330731 for custom res, took my powerstrip values for 1360X1024, but the image is too small, kind of 4X3 looking

-I also tried 1360 X 768, and the image is the correct shape (16X9), but is about 2/3 too small for the screen

-I also used the wizard and inputted my values, but again the size of the image is either too smal or 4X3 looking.

Any help greatly appreciated. I am a HTPC guy and never had any problems getting a perfect match with powerstip.


Thanks!


Jason
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top