AVS Forum banner

Status
Not open for further replies.
1 - 7 of 7 Posts

·
Registered
Joined
·
2,187 Posts
either moome or MoonJong is working on an external DVI to VGA box atm. Can't remember which one of the two guys it was.


The external box will work with a NEC PG as well.
 

·
Registered
Joined
·
2,187 Posts
if the PG series had a slot for them, then possibly it could be better, but the PG series does NOT have an expansion slot.


Btw,

you would run a long DVI cable from your source to the box, making the (analog) cable from the box to the PJ as short as possible.
 

·
Registered
Joined
·
8,079 Posts
There was talk of a possibility of making one that took the place of the video decoder board.


But I wouldn't tie myself to a PG like that - I'd get the external on and wire it directly to the Gain board (bypass the front input board and all that terrible cabling and those tiny connectors) and mount it inside the cover.


The external one would be upgraditus-proof.
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top