AVS Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
722 Posts
Discussion Starter · #1 ·
About 6-7 hours in to it now. I am trying to get a good picture at 800/[email protected] on my xp pc. Some random observations;1 Using point convergance has allowed nearly percfect convergence 2 The screen is still horribly out of alignment(wiggles in corners) so no matter how good the convergence it still looks like ****. 3 Red focus is good all around. Blue focus is average in the center horrible in the bottom right slightly better than horrible top right. Green is good center horrible right corners,slightly better than blue though. My strategy has been to start with green cross coarse pattern and try to get it square and then converge from there. I have failed miserably at getting it square. Any suggestions on this would be greatly appreciated. Also any explanations of why focus of b&g right corners is so elusive thanks to all in advance.:eek:
 

·
Registered
Joined
·
3,901 Posts
First of all, I hope you are stopping to play video every 30 minutes or so maximum. Secondly, have you read the ground up setup threads on this forum ? If you don't have certain things dialed in to begin with you will have a very difficult time doing some setups. There is a VERY distinct ORDER to setting up an NEC and unless you follow this order, it is likely why you cannot get good geometry and focus. Search for NEC, then read the 5000 posts, then print out the 15 or so that give a ground up setup guide, then reread your manual, then try again, but don't do adjustments for too long without playing some video, and for goodness sake, DON'T use point convergence. Your pj's convergence will drift constantly and you could easily fry some controls by using too much point. NEC's can be perfectly setup without using ANY point, and it was only an option for a tiny portion of the screen in a normal install or for use in non-standard installs.

EDIT: Added info:please read these posts and see if they help.
http://www.avsforum.com/avs-vb/showt...ight=nec+setup
http://www.avsforum.com/avs-vb/showt...highlight=nec+
http://www.avsforum.com/avs-vb/showt...ight=nec+setup

Three posts with TONS of information, if you STILL have questions, try some more searches, I used "nec setup" and only my username and got 60 responses, so chances are any questions you have, have been answered already.
 

·
Registered
Joined
·
722 Posts
Discussion Starter · #3 ·
thanks for the warning! I knew this was the answer(forum search) i guess i was hoping for the easy way out.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top