AVS Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hi Guys


Need help with a funny problem that I am having.


I am getting my cable through a Motorola HD DVR DCT3400. The initial setup for this was:


a) Audio/Video output to Sony HDTV through HDMI

b) DVR box set to send out all video in 1080i format

c) 4:3 override set to off

d) TV Type set as 16:9


The DVR used to scale all the channels (HD and non HD) according to this and it was perfectly fine.


I recently got Onkyo 6200 and the set up for the cable goes like this:


a) Audio/Video output to Onkyo AVR through HDMI

b) Video output from the AVR to Sony HDTV

b) DVR box set to send out all video in 1080i format

c) 4:3 override set to off

d) TV Type set as 16:9


The sound is working perfectly fine but now the DVR video output keeps changing according to the channel I put.
I assume it uses the native resolution for that channel (not sure tho). I need to redo all the settings and adjust the zoom everytime.


The Comcast people (as expected ;-) ) ran online diagnostics and asked me to redo the settings for the cable box .. which I have done some n number of times. The problem is still there..


This is getting pretty irritating



Please help ! !
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top