AVS Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
730 Posts
Discussion Starter · #1 ·
Quote:
Originally posted by MAX HD:


I would like to rotate the antenna at three separate locations within the house for three TV's.

Any ideas what I need to accomplish this?
You could use the CM9521 rotor (or just the 9537 if you already have a rotor installed) with its IR controller and then use IR repeaters to repeat the IR control codes from the remote to the rotor's IR receiver/controller. Supposedly you can program various All-in-One remote controllers to output the IR codes needed to control the CM9521 rotor.


Info on the CM9521:
http://www.channelmaster.com/pages/rc1.htm
 

·
Registered
Joined
·
887 Posts
Dagman,

Thanks for the suggestions.However,I'm looking for a low-tech solution such as wiring ideas/switching possibilities,that sorta thing.I have a remote and a manual control box now and another manual box w/switching capability between the three is what I'm looking for.


Thanks!
 

·
Registered
Joined
·
887 Posts


I would like to rotate the antenna at three separate locations within the house for three TV's.


Any ideas what I need to accomplish this?


Thanks!
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top