AVS Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
218 Posts
Discussion Starter #1
Oval dish (4x4 multiswitch) with 2 lines running into the house feeding 2 IRDs.


I want to enable a 3rd IRD but do not want to run a 3rd line into the house.


Is this possible with splitters or another multiswitch ?
 

·
Registered
Joined
·
3,432 Posts
Don't want to run another line or can't run another line. It can be done with stackers/de-stackers. Search this forum for more info.


-Robert
 

·
Registered
Joined
·
3 Posts
a few questions, from your oval dish (two lnb's) you have all four cables feeding into your outdoor mounted multiswitch? then you have two cables running from the multiswitch into the two receivers in the house? and now you want a third receiver inside? answer: no, not possible, you will have to run a third cable in to the third receiver. Or bite the bullet and run all cables necessary to the dish and relocate your multiswitch inside. if you choose to do that then I suggest pulling six cables from your dish just for future expansion. -Jaseun
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top