AVS Forum banner
Status
Not open for further replies.
1 - 20 of 536 Posts

·
Registered
Joined
·
13,423 Posts
Discussion Starter · #1 ·
The long awaited release version of MyHD software is now ready for download.


MyHD Application

www.nabs.net/cwatson53/MyHD_v160US.zip


MyHD Driver

www.nabs.net/cwatson53/MyHD_DRV_v160E.zip


MyHD v1.60US User Manual

www.nabs.net/cwatson53/MyHD_manual_v160E.zip


MyHD change notes.


###########################

# MyHD v1.60 changes

###########################


1. Repairing and compacting the EPG database at the start-up of MyHD.


2. bug fixed:

- when Screen Ratio is changed by OSD menu, Screen Format is set incorrectly => fixed.

- wrong display of ampersand (&) in OSD information was fixed.

- invalid channel gain setting at the start-up of DVD playback mode was fixed.

- bug in parsing IFO file at DVD playback mode was fixed.

- the computer does not wake up for the scheduled recording if the computer was

rebooted after setting the scheduled recording => fixed.

- special characters which are not allowed in Windows filename in the capture filename

causes failure in recording => fixed not to allow these characters in MyHD.



* TitanTvHelperApp 1.2

1. Automatic selection of antenna input was improved.



* MyHD driver v1.60 changes

1. Demux of MPEG2 AAC audio supported.



###########################

# MyHD v1.56b3 changes

###########################


1. OSD schedule list

- "Reservation List" screen will appear by pressing the FAV button on

EPG screen.


2. add a loop option in file playback => four loop mode

- "all of list" and "no loop" => all of list are played once

- "single item" and "no loop" => single item is played once

- "all of list" and "loop" => all of list are looped endlessly

- "single item" and "loop" => single item is looped endlessly


3. bugs fixed:

- program number sorting bug in virtual channel channel was fixed.

- channel scan bug when the channel has no virtual channel table => fixed.

- in Channel List box, buttons remain disabled after scanning channels => fixed.

- file delete function in OSD file list box just deletes the first file of split

files => fixed.

- wrong display of ampersand (&) in OSD file list box was fixed.

- bug in OSD file list box when there are more than 10 files => fixed.

- Pb control bug in OSD video control was fixed.

- bug that at the initial file playback the brightness and saturation values of RGB

display effect are written from the values of RGB analog video control => fixed.

- mute is not disabled in SPDIF mode => fixed.

- bug in SPDIF mode with no sound card => fixed.

- other minor bugs were fixed



* TitanTvHelperApp 1.1

1. support new file format of TitanTV guide.



* MyIRC 1.04

1. replace "Deactivate Remote Controller" option by "Do not use IR receiver" option and

"Do not use MyHD remote controller" option.

- if "Do not use IR receiver" is checked, MyIRC will not use the IR receiver. The IR

receiver can be used in other software.

- if "Do not use MyHD remote controller" is checked, MyIRC will not receive commands

from the MyHD remote controller.



* MyHD driver v1.56 changes

1. Support detecting changes in PAT/PMT.

2. MDP100 Capture can be used in Windows Movie Maker.

3. Bugs fixed:

- background recording stops and does not recover after RF signal loss => fixed.



###########################

# MyHD v1.56b2 changes

###########################


1. modify the virtual channel mode

- all the subchannels of the virtual channel table in the channel list

will be listed if you are scanning with the virtual channel mode.

- if you turn off the virtual channel mode after scanning with the virtual

channel mode, all the subchannels except the first subchannel of the

physical channels will be deleted from the channel list. Re-scanning

is needed to recover the deleted subchannels.

- the subchannel buttons are available only if the virtual channel mode

is disabled.


2. modify the OSD file list box

- the same style as the other OSD's.

- add menus to the list box : delete item/file, move item up/down.

- you can switch between the file list and the menu by pressing MENU.


3. add file sub-menu in the OSD menu

- loop option, skip time can be changed by OSD.


4. add OSD skin in ETC sub-menu - 4(blue, red, green, gray) skins added


5. add scheduled recording funtion from OSD EPG

- "Reservation Capture" screen will appear by pressing the MENU button on

EPG screen.

- you can change the capture mode and time by menu.

- you CANNOT confirm the added schedules by OSD yet. -- will be added.


6. add 1280x768p resolution


7. "Prev channel" was restored - CANCEL button with no OSD


8. bugs fixed:

- Pb control bug in OSD video control was fixed.

- OSD analog video control was enabled in YPbPr mode.

- loss of changes to video control setting in YPbPr mode was fixed.

- OSD saturation control bug in YPbPr mode fixed.

- incorrect file name in OSD file list was fixed.

- subchannel bug in file mode was fixed.

- the guide button of the control panel always displays OSD EPG.

=> displays dialog EPG or TitanTV EPG.

- when the overlay window cannot be displayed (ex: when the screen saver

is password-locked) MyHD starts without the overlay window.

=> the related bug in scheduled recording was cleared.

- any changes to the MyHD settings will be saved immidiately.

- FF/REW on the paused file playback mode will not start playback.

- reservation overlap bug was fixed.

- slow OSD navigation was enhanced.

- volume in SPDIF mode will not be changed.

- when more than one recordings are scheduled, some computers do not wake

up after the first recording => fixed.

- when MyHD is closed by the menu of the Windows task bar, the computer

does not wake up for the scheduled recording => fixed.

- when the recording was scheduled at 24:00, it does not start => fixed.

- when the physical channel number is entered from the keyboard or the

remote, incorrect intermediate informations about the virtual channel

are displayed => fixed.

- other minor bugs were fixed



* MyHD driver v1.55.3.9 changes

1. Support MDP120.

- NXT2002 routines added

- digital video output supported

2. Calibration of I2C bus speed added.

3. Video buffer level increased to minimize buffer empty in file playback mode.

4. Saturation control bug in YPbPr mode was fixed.

5. 1280x768 resolution added.



###########################

# MyHD v1.56b1 changes

###########################


1. OSD menu like set-top box in HD mode

; If you press "MENU" button of the remote OSD menu will be displayed.

; You can change a number of setup parameters using the remote only.

; Use "UP", "DOWN" and "SELECT" button for menu navigation.

; Most of setup paramenters are updated after pressing "SELECT" except

video control and OSD transparency (these are updated immediately)


. Screen menu >>

video control (display effect, channel gain, analog video)

screen ratio, resolution, display type

. Sound menu >>

audio output (cable out, wave/SPDIF)

digital audio output (stereo/surround/SPDIF)

analog audio (stereo/mono/SAP)

. Channel menu >>

virtual channel enable/disable

. ETC menu >>

digital/analog capture mode

OSD transparency

channel display mode (channel number and/or channel name)

remote turn-off mode (program exit/compture-off)


2. OSD list box in HD mode (channel, file list, screen format, audio and subtitle)

. FAV button shows the active channel list for the current input

and shows the active file list in file play mode

. ASPECT button shows the available screen format list for the current

screen ratio

. AUDIO button shows the available audio list for the current program

. CAPTION button shows the available subtitle list for the current

DVD file

; On each list box, you can select the item by "UP", "DOWN" and "SELECT" buttons.


3. Progammable OSD info

. input mode, channel number/name, source video resolution, audio info,

signal strength (percentage with bar) in ATSC mode, play time with progress bar

in FILE mode, play time in TAPE mode

; source video resolution and signal strengh are not displayed in NTSC channels

and external video input

. current time, output resolution, screen ratio/format, audio output mode

. each info can be enabled or disabled in OSD setup of Config menu

. font, style, size and color can also be selected in OSD setup of Config menu

; changing font and its style is applied to the OSD of menu, EPG and list boxes

but font size and color is fixed for these OSD


4. EPG with virtual channel

. EPG on either OSD or Windows dialog box

; only for the ATSC channels with PSIP informations

. EPG on OSD

; appears when pressing GUIDE button in HD mode

; Pressing GUIDE button again will change the display mode of EPG

between multi-channel display and single channel detail display

; Pressing SELECT button on the selected channel of EPG will update

the EPG informations immediately

. EPG on Windows dialog box

; appears when pressing the guide icon on the extended control panel

; support schedule adding => the selected program in EPG table can be

added to the reservation capture list

; If "Using TitanTV Epg" option is enabled in VGA setup, TitanTV web

page will be displayed instead

. support virtual channel number and channel name

; virtual channel mode can be enabled by the option in Channel List or

Channel sub-menu of OSD menu

; ATSC channels without virtual channel information have the same virtual

channel number as their physical channel number.

* tested only on Korean stations (the captured streams of US stations

which we have do not have EPG data)


5. Recording

. background recording option for schedule capture

; without overlay and audio decoding

; minimized to the icon on the system tray bar

; enabled by the option in Capture setup>Capture Reservation>Detail Options

. one touch recording by the record button

; infinite > 10 > 30 > 60 > 90 > 120 > 180 minites > infinite ...

. recording can be paused and resumed by the play/pause button

. filename and sub-folder can be selected from the preset list and

instant recording and scheduled recording can have different settings.

; instant recording => Capture setup>Option>Detail Options

; scheduled recording => Capture setup>Capture Reservation>Add

. "Exit MyHD" is added to "Between Captures" and "After File Reservation Capture"

options in Capture setup>Capture Reservation>Detail Options

=> this mode will just close MyHD only


6. File playback

. FF and REW skip time can be set separately.

. On file mode, the numeric buttons on the remote can be used

as FF/REW skip.

1= -REW*1, 2= FF*1, 3= FF*2

4= -REW*2, 5= FF*4, 6= FF*8


7. Pop-up menu

. The items for each input were merged under the new sub-menu "Input".

. Each config sheet and options can be accessed directly by the sub-

menus of "Config panel".

. "Add reservation" was added in the pop-up menu and the extended

control panel.


8. Input

. Video-in was divided into S-video and composite

. Favorite mode was added to the input list


9. Overlay window disappears when it is disabled

=> the task bar of MyHD will be minimized to the system tray icon.


10. When auto-scanning, if analog or digital mode is specified scanning

will be performed on the selected mode only.

=> old channel list is not cleared in this mode


11. Config menus

. DVD Setup is changed to Device Setup and Tape Device setup is added to it

=> If you have more than one tape devices they will be displayed in the

tape device list. The list can be update after changing the connection

of devices by "Update" button.

. OSD Setup is added

; each OSD info can be enabled or disabled

; font, style, size and color can also be selected

; changing font and its style is applied to the OSD of menu, EPG and list boxes

but font size and color is fixed for these OSD



* MyIRC 1.03 changes

. if "deactivate remote controller" option is enabled and "activate

external remote controller" option is disabled, MyIRC releases

the serial port and other remote software can be used with the MyHD

IR receiver.



* MyHD driver v1.55.3.6 changes

1. Maximum streams in a program was increased.

2. Incorrect display of DVD subtitles was fixed.

3. Start-up of Windows Messenger causes the crash when MyHD plays file or tape

=> blocked in driver.

4. Multiple programs in a channel are sorted by the program number.

5. Video decoding delay was decreased to avoid overflow for ABC station in US.

6. Audio recovery from the stream error was improved.

7. The delay in changing screen ratio, screen format, resolution, display type

was decreased.





###########################

# MyHD v1.55.3 changes

###########################


MyHD v1.55.3 application program requires MyHD driver version v1.55.3 or

later. You must upgrade the driver before running the program. You can

update the installed MyHD driver into new version using the driver update

utility (UpdateMdp100Driver.exe).



1. Add "Play Automatically upon Inserting Disc" option

- This feature operates only when MyHD is running.


2. DVD mode playback feature

- HD full screen output is disabled for playback of copy-protected (scrambled) DVD

to follow the DVD CCA licence, because MyHD does not have a copy-control circuit.

- Support DVD mode playback using "*.ifo" files.

=> This enables the DVD mode playback of DVD files in HDD.

a) If you open "VIDEO_TS.IFO" file on FILE mode, MyHD goes to DVD mode and then

starts playback. (This needs VTS_xy_0.IFO and VTS_xy_z.VOB files of the title

set to play)

b) If you open "VTS_xy_0.IFO" file, MyHD play that tile set only.

c) If a certain title set is omitted, MyHD skips that title set.

d) If you press EJECT button on this mode, MyHD shows a file open dialog box.

- Fix bugs related to subtitle and audio selection.

- Support the selection of subtitle and audio before they appear

- Fix bug on displaying corrupted subtitles.


3. New video output resolutions and hot keys

- Add new resolutions for flat panel displays

16:9 = 1360x768P, 864x480P

4:3 = 1280x1024P(real resolution=1024x1024P), 800x600P

- Add hot keys for each resolutions

Ctrl+Shift+# (#=1,2,...,9,0) : change to the #-th resolution

Ctrl+N : change to the next resolution


4. Add "Turn off the Computer when closing MyHD by Remote Controller" option

- If the option is selected and you close MyHD by the remote controller,

the comptuter will shutdown after some delay.

- You can cancel the shutdown by Cancel button on the Windows screen or

pressing ESC button on the remote controller.


5. Add "move to previous channel" feature

- You can change to the previous channel by pressing ESC button on the remote

controller or hot key (Shift+P) when watching TV channel.


6. Add "Start with HD mode" option in VGA setup and command line option "/h"


7. Prohibit the both of "Wave" and "SPDIF" checkboxes on audio output setup

for stable operation.


8. Support SPDIF pass-through of DTS audio


9. Support the playback of *.ts files including split files (*.xxxx.ts) and

the file type association with them at install.


10. Bug: Reservation capture with suspend or hibernate does not work correctly

=> fixed.


11. Other minor bugs are fixed.


- Known issues

1. If the audio PID of a digital channel is changed, the audio output stops.

2. MyHD supports the decoding of Dolby AC3 audio only, DTS audio can only be

passed to SPDIF output.

3. DVD with interleaved cells (multi-angle or special featured DVD) cannot be

played correctly.



* MyHD v1.55.3 installer changes

1. Can associate with DVD files of "*.ifo" extension.



* MyIRC v1.03 changes

1. Add "Deactivate Default Remote Controller" option.

2. Add learning buttons related to the video output resolution.



* MyHD driver v1.55.3 changes

1. Support power-down mode

2. Enhance the start-up delay on DVD playback

3. Support SPDIF pass-through of DTS audio

4. Support the color palette setup on DVD mode playback

5. Add output video resolution : 1360x768P, 1024x1024P, 800x600P, 864x480P

6. Decrease the audio level of NTSC to be balanced with ATSC

7. Crash may occur when Windows Messenger starts on file or tape playback - fixed




###########################

# MyHD v1.55.2 changes

###########################


1. Increase the maximum number of capture reservations from 10 to 50


2. Support the export and the import of the file play list. (*.MPL file)


3. Add DVD mode

- Add DVD mode to input modes (hot key : Shift+D)

- Enables the direct playback of title sets in DVD (displayed as "title" in MyHD)

- Add command line option "/d" : MyHD starts up with DVD mode


4. Add "Set MyHD Process Priority High" option.


5. Add "Start with Last Input Mode" option.


6. The digital channel, which is re-transmitted over the cable without re-mapping

of channel frequency, can be tuned even if there are analog cable channels and

digital terrestrial channels in one antenna input.


7. Other minor bugs are fixed.



* MyHD v1.55.2 installer changes

1. Can associate with playlist files of "*.mpl" extension.

2. Can associate with DVD file of "*.vob" extension.



* MyHD driver v1.55.2 changes

1. Time-stamp can deviate on TP file playback - fixed

2. Enhance the time delay of changing aspect ratio on ATSC or file playback

3. Enhance the video recovery after FF/REW/JUMP on file playback

4. Fix bugs related to audio decoding of ATSC or file playback

- Fix the incorrect status for digital audio channel mode

- Fix the audio drop-out of SPDIF output

5. Support VPX3226E NTSC decoder




###########################

# MyHD v1.55.1 changes

###########################


1. Enhance VOB file playback feature

- Display subtitle on VOB file

- Support the playback of copy-protected DVD titles


2. Support the capture from D-VHS VCR to HDD files and the recording the TP files

in HDD to D-VHS VCR.


3. Support JPEG format on the still image capture


4. Bug : Moving-listing up/down in the FAV list does not move the Channel Name => fixed


5. Bug : Selecting "Delete Files" does not completely remove all recorded files

in a folder => fixed


6. Bug : The OSD does not display the correct time between 12 and 1 PM => fixed


7. Bug : MUTE button does not work on recording mode => fixed


8. Enable STOP button to stop the recording


9. Enhance the program start-up delay


10. Other minor bugs are fixed.



* MyIRC v1.02 changes


1. Add button-learning feature

- The buttons of the default MyHD IR controller always act.

- MyIRC can learn the button of other IR controller as followings:

(1) Select "Config MyIRC" menu on the MyIRC icon.

(2) Select the button to learn and then press Learn button.

(3) Press the button of the external IR controller 5 times



* MyHD driver v1.55.1 changes

1. Support playback of copy-protected DVD

2. Support DVD subtitle




###########################

# MyHD v1.55 changes

###########################


1. Enhance AVI capture

- If DivX video codec is installed it will be listed in the video

compressor list.

- "Display All Video/Audio Compressors" option shows all installed

video/audio compressors.

- Video size of AVI capture can be selected in the pre-defined set.

- Large video size or complex audio compressor consumes a lot of CPU

power, so that frame drops can occur.


NOTE: When the audio is encoded by MPEG Layer-3 compressor and

Moonlight Odio Dekoda is installed, some players cannot synchronize

audio and video for the AVI files captured with frame drops.

=> Windows Media Player of Windows XP can play correctly.


2. Enhance video output control

- Gain of each video channel can be controlled individually, so that

the color correction of HD video output can be done by this control.

- Analog video control can balance the video of the analog channels

with that of the digital channels.


3. Extend file numbering over 99

- file.tp -> file_01.tp -> .... -> file_99.tp -> file_100.tp

-> .... -> file_999.tp -> file_1000.tp -> ....


4. Support HRC & IRC cable system including auto-detecting of the system.


5. Add the command line options of MyHD.exe

- /f : start-up with file mode

- /t : start-up with tape mode

- /v : start-up with video-in mode


6. Add hot-keys

- ctrl+shift+m : toggle seperate monitor option

- ctrl+shift+o : toggle show overlay window option


7. Capture setup

- split the capture mode into two for digital channel and analog channel.

- merge the capture option and the detail settings of each mode into

one dialog window.

- add option to show "REC" or not while recording.


8. Reservation capture

- add "Watch" mode to the capture mode of the reservation capture setup

=> do not perform any capture operation, just show the scheduled TV channel

- add a minor channel (sub-channel) setting for the digital channel

- add "Title" edit box to the reservation capture setup dialog

- support the reservation capture of "analog video input"

=> select "(video in)" of the active channel list


9. Add "FF/REW Skip Time" option for file play


10. Reduce CPU usage after changing the overlay mode or "Show Overlay Window"

option in Windows XP


11. Add "4:3 & 16:9" to Screen Ratio option

- All possible screen formats for 4:3 and 16:9 screen ratio are available

=> Full, Zoom 4:3, Zoom 16:9, LetterBox 4:3, LetterBox 16:9


12. Capture setup and File play setup pages can be showed while recording.

=> The reservation capture list or the file play list can be edited

even when recording is activated.


13. Support TitanTV.com (US version only)

- display the channel when clicking the WATCH icon

- add the schedule to the reservation capture list when clicking the RECORD icon

- MyHD installer can setup the helper application of Internet Explorer automatically

- MyHD TitanTV helper will decide between two antenna inputs from the guide

information => If there is any ambiguity user should select the correct

antenna input. Auto-scanning for each antenna input is needed for proper

operation of MyHD TitanTV helper.

- If only one antenna input is used, it is better that the other input is

configured to different mode.


14. bug: When 2 or more recordings are scheduled, after the 1st recording is

finished the rest of reservation items are removed one by one whenever

the capture setup dialog box is opened and OK button is pressed => fixed.


15. bug: When mute is active, the Wave volume of Windows is muted => fixed.


16. Other minor bugs are fixed.


- Known issues

1. If the audio PID of a digital channel is changed, the audio output stops.

2. MyHD supports Dolby AC3 audio only, other audio format will be supported later.

3. The digital channel, which is re-transmitted over the cable without re-mapping

of channel frequency, cannot be tuned if there are analog cable channels

below the digital channel.

4. When clicking the TitanTV icon, if there is no antenna input which has

the same mode as the clicked channel, the added schedule may not be

recorded correctly. => correct antenna setup is needed



* MyIRC v1.01 changes

1. MyIRC : Add title infomation to 'Reservation Capture Information' dialog box



* MyHD driver v1.55 changes

1. YUV-format capture does not work correctly - fixed.

2. The gain of each video channel can be controlled individually.

3. Crash may occur when the PMT table is corrupted - fixed.

4. Audio PID table is not updated when the next VOB file is played - fixed.




#############################

# MyHD v1.53 changes

#############################


1. Dolby AC3 stream can be bypassed to the SPDIF output of a sound card

- Service pack 2 must be installed for Win2000

- Quick Fix Engineering package(269601USA8.EXE) must be installed

if the WDM sound card driver is used on WIN98SE

- Some sound cards does not mix its analog audio input into SPDIF output.

=> use the SPDIF output of MyHD card instead.


2. Added feature for still image capture

- frame/field mode is selective (selected in the detail setting window of

still image capture)

- hot key (shift + s) is added for the still image capture even when

transport stream capture or AVI capture mode is selected


3. bug that the program is hanging when reservation capture is activated on

WinXP with MyHX v1.53beta is fixed


4. bug related to selecting the recording input for AVI capture is fixed


5. channel can be changed by up/down key even if there is no active channel


6. insufficient memory problem with Czerny 3000 sound card is fixed


7. delayed response of the volume control knob when receiving the analog TV

is fixed


8. bug that selecting another audio stops SPDIF audio output when SPDIF output is

selected for DVD play is fixed


9. bug that repeating the aspect ratio change stops the file play is fixed.



#############################

# MyHD v1.53beta changes

#############################


1. add the custom capture size in the detail setting of the transport stream capture

- maximum 4GB for FAT32 file system

- NOTE: the file over 2GB cannot be treated by Windows Explorer in Windows98,

it can be copyed by DOS command.


2. add Hot keys for all the button of the remote controller and the control panel


3. bug that AVI capture is not possible when the overlay window is not displayed

is fixed => DirectX8.0 or later is required


4. AVI capture is fixed so that OSD is not recorded even if OSD on overlay option

is active.


5. Pressing the windows related keys (ALT key, Windows start menu key) releases

the full screen mode into VGA mode to avoid hanging on the full screen mode.


6. some bugs related to file play are fixed

- search function does not worked for the file size over 2GB

- other minor bugs


7. some problems with DivX are fixed

- no audio for digital channel if MMSwitch(Morgan Multimedia Stream Switcher)

is installed

- no overlay if DivXG400 is installed


8. bug that the SPDIF output of MyHD cannot be output without a sound card

is fixed



#############################

# MyHD v1.52 changes

#############################


1. support aspect ratio conversion

2. support DVD file play

3. new or updated feature for the file play setup

- the order of the play list can be changed

- loop play option is added (all of list or single item)

- option "play the next numbered file continuously" is added

- option "add captured file to the play file list" is added

4. support 1920x1080i resolution on Sony 10HT projector

5. option to display OSD on the overlay window is added

6. the following bugs are fixed

- after an item is remove from the file play list, an empty file of

the same name as the removed item is created when another file

is played.

- when the file fo korean name is drag-and-droped to MyHD, it is

not played.

7. alternative VSB reception mode for singal impairment by cable repeating

is added, mode can be selected by Cable_p0307.exe uitility.



#############################

# MyHD v1.51 changes

#############################


1.Added function of play files continuously from play file list.

All of deviding captured files(ex, a.tp, a_01.tp, ...) can be continuously played by just adding

the first file name(a,tp) in the play file list.

2. Bug of remaining volume control OSD is fixed after volume is coltrolled in HD mode during capturing.



#############################

# MyHD v1.50 changes

#############################


1. Some functions of file display are added: FF(Fast Forward), REW(Rewind) and Navigation bar.

2. The captured files are played continuously without cut off.

3. Setting file size option is added: 2G or 650M byte.



#############################

# MyHD v1.43 changes

#############################


1. Video Input Information bug in main control panel was fixed.



#############################

# MyHD v1.42changes

#############################


1. OSD, IRC receiver program and some other bugs were fixed.



#############################

# MyHD v1.41 changes

#############################


1. The function of display effect is added for controlling brightness, contrast and saturation

in the CONFIG PANNEL.

2. The matter of dropping frames is removed between capturing files.



#############################

# MyHD v1.40 changes

#############################


1. Devided capture-files are playing continuously

(Example: capture.tp -> capture_01.tp -> capture_02.tp -> ... -> capture.tp -> ...)

2. Replay files by double click a file in Windows Exporer or by dragging and dropping a file

on overlay window because the function of Drag & Drop is added.

(* Only for the file of transport Stream)

3. The matter of Dragging is eliminated when right button of a mouse is clicked in

the beginning after the program of MyHD is executed

4. "Error !!" message will be indicated folowing a file name for a defected file

instead of size(00 MB) and the file will not be executed.

5. Removed bugs for a catching signal of channel number 5 and 6.

6. Other bugs were revised.



#############################

# MyHD v1.3 changes

#############################


1. Three capture functions are supported:

a. Capturing a broadcasting program as transport stream

b. Capturing moving images as an AVI format

c. Capturing a still frame image as bmp format

2. Reserve Capture is supported for a favorite program in a specific time.

3. Stored files can be played by the given remote controller on the HDTV mode.

4. OSD information is desplayed on a seperated monitor when MyHD is set for a dual monitor.

5. "No Signal" is appeared on the overlay window and the HDTV mode

if a current broadcasting is not detected.

6. Other bugs were revised.
 

·
Registered
Joined
·
969 Posts
Cliff - Thank you for this!


Are there any release-notes available for this version? I'd be interested to see a list of changes since the previous version. To your knowledge is this a similar release to Beta 3/15539 ?


Andy.
 

·
Registered
Joined
·
953 Posts
After I installed the new application on my system, the first thing I checked out was the fast forward and rewind controls. Although it is still not possible to fast forward or rewind a recorded program beyond a file boundary, the keyboard shortcuts now let you skip to a previous or next file. IMO, this is a big improvement for navigating through a recording. Thanks Cliff and DC.
 

·
Registered
Joined
·
697 Posts
Any special (voodoo) methods that should be used to remove previous versions? Oh, and I am wondering what exactly MyIRC does. Instead of the remote/IR that came with MyHD, I am using Girder with another remote control. Do I need MyIRC?
 

·
Registered
Joined
·
3,218 Posts
Cliff,


What should be the video outputs be for this version (same as beta 3?) or are the defaults 80, 80, 76 now correct?


Joel
 
1 - 20 of 536 Posts
Status
Not open for further replies.
Top