AVS Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

· Registered
Joined
·
55 Posts
Discussion Starter · #1 ·
Anyone installed a Quad card in the ISS-6020? Seems that there is a jumper cable needed between the card and switcher.


I know the connector marked DE/SI on the card (6 pin) is the one to use. There are two connectors in the switcher marked SI also 6 pin.


Is it the connector adjacent to the quad card connector or the one on the opposite side of the backplane where all the in/out cards plug in?


Will the quad decoder card also allow an RGBHV signal to be decoded to the video output card? Or will it still only allow composite in through the composite output card?



:confused:


Jeff
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top