AVS Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
540 Posts
Discussion Starter #1
I can't get any other output except a full-blue screen when switching to a CVBS or YC input ? I have the V4-dec installed and it sees the incoming signal, but no output :?


maybe the internal wiring is wrong

anyone got the schematics / service manual ?
 

·
Registered
Joined
·
540 Posts
Discussion Starter #3
i know he does, nothing in there thats of any use

thats why im looking for the SERVICE manual
 

·
Registered
Joined
·
540 Posts
Discussion Starter #5
cable is in place (up/right) connecting to the 'backplate' in the iss
 

·
Registered
Joined
·
18,501 Posts
Is your signature really a quote by me? THat's profound!



I haven't had ISS switcher problems, but probably have a spare quad decoder here if you want to try it. Or send me yours and I'll try it in my switcher.
 

·
Registered
Joined
·
540 Posts
Discussion Starter #7
no need to .. i have 2 quad's here

one in the ISS other in the 9PG ... talk about overdone



(yes, it's a quote from you... can't remember were from thou.. quite sometime ago...)
 

·
Registered
Joined
·
18,501 Posts
Those two quad boards do not interchange (between the PG and the ISS), at least it didn't work for me. They are slightly different.
 

·
Registered
Joined
·
540 Posts
Discussion Starter #9

Quote:
Originally Posted by Curt Palme /forum/post/13021030


Those two quad boards do not interchange (between the PG and the ISS), at least it didn't work for me. They are slightly different.

there are indeed different versions

but some do interchange, the one in my 9pg is from another iss, so that works

the one in the iss was already in the iss when i bought it, so that can't be the problem (i try to swap them anyway..)
 

·
Registered
Joined
·
540 Posts
Discussion Starter #10
problem half solved, thnx doug


strange enough the v4-dec from the iss doesn't work in the iss, the one from the pg does thou
the pg one has the plastic tabs to pull the card, so it really is a pg card

the iss card doesn't have the tabs, so it's supposed to bee in an iss, yet no worky


it's in the pg now.. but i can't check.. can't find my longrun composite cable



but who care's, i only use the v4-dec for calibrating/setup/white reference

like once in a blue moon
 
1 - 10 of 10 Posts
Top