AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
Would someone kindly take a look at my error logs below. I am trying to put the 30XX image on a new Samsung HDD by imaging MikeyBoys file.


I believe the 1st error was due to pointing to the zip folder instead of the "showstopper&replay30xximage.img file" .


The second may have pointed to the wrong file again, it looks like it pointed to rtvpatch.img. Is this the correct file for "restore target drive"?


After the second try I the tried to patch the target drive and got the message that said PROCEED: "TARGET DRIVE DOES NOT SEEM TO BE A REPLAYTV DISC - DO YOU WANT TO PROCEDE.


I stopped and exited here.


I'm probably missing something basic or being over paranoid about the "PROCEED" meesage.


Thanks so much.

Pete






1stTry:


0) SAMSUNG SV1204H - (120 GB) - NOT a ReplayTV Disk

1) ST360021A - (60 GB) - May be PC Disk

2) ST360021A - (60 GB) - May be PC Disk


Source: Select a drive from the list and click 'Set'

Target: 0) SAMSUNG SV1204H - ( 120GB ) - NOT a ReplayTV Disk


RTVPatch version 2.4, built on Jan 19 2003, 12:54:57

\\\\.\\PhysicalDrive0 (SAMSUNG SV1204H) : Detected size = 234493056 sectors

\\\\.\\PhysicalDrive1 (ST360021A) : Detected size = 117231408 sectors

\\\\.\\PhysicalDrive2 (ST360021A) : Detected size = 117231408 sectors

\\\\.\\PhysicalDrive3 : DFP_GET_VERSION failed (not a hard drive?)

\\\\.\\PhysicalDrive3 (Unknown) : Using binary search drive size detection

\\\\.\\PhysicalDrive3 (Unknown) : There appears to be a seek overflow problem on this drive, interesting!

\\\\.\\PhysicalDrive3 (Unknown) : Detected size = 267386880 sectors

\\\\.\\PhysicalDrive3 (Unknown) : Unable to read partition table

Copy from source 'C:\\Documents and Settings\\Pete Brennan\\My Documents\\Programs\\Showstopper&replay30xximage3.02.zip' at offset 0

Copy to destination '\\\\.\\PhysicalDrive0' at offset 0

Copying 76509 blocks (37MB)

*** Resetting MPEG partition

Partition 1 size is 1336123723 (0x4fa3a14b) blocks.

Partition 2 starts at sector -1128182172 (0xbcc14e64)

*** ERROR: Partition 2 does not start immediately after partition 1

*** Restore complete



2nd Try:

0) SAMSUNG SV1204H - (120 GB) - NOT a ReplayTV Disk

1) ST360021A - (60 GB) - May be PC Disk

2) ST360021A - (60 GB) - May be PC Disk


Source: Select a drive from the list and click 'Set'

Target: 0) SAMSUNG SV1204H - ( 120GB ) - NOT a ReplayTV Disk


RTVPatch version 2.4, built on Jan 19 2003, 12:54:57

\\\\.\\PhysicalDrive0 (SAMSUNG SV1204H) : Detected size = 234493056 sectors

\\\\.\\PhysicalDrive1 (ST360021A) : Detected size = 117231408 sectors

\\\\.\\PhysicalDrive2 (ST360021A) : Detected size = 117231408 sectors

\\\\.\\PhysicalDrive3 : DFP_GET_VERSION failed (not a hard drive?)

\\\\.\\PhysicalDrive3 (Unknown) : Using binary search drive size detection

\\\\.\\PhysicalDrive3 (Unknown) : There appears to be a seek overflow problem on this drive, interesting!

\\\\.\\PhysicalDrive3 (Unknown) : Detected size = 267386880 sectors

\\\\.\\PhysicalDrive3 (Unknown) : Unable to read partition table

Copy from source 'C:\\Documents and Settings\\Pete Brennan\\My Documents\\Programs\\RTVPatch.img' at offset 0

Copy to destination '\\\\.\\PhysicalDrive0' at offset 0

Copying 2880 blocks (1MB)

*** Resetting MPEG partition

Partition 1 size is 0 (0x0) blocks.

Partition 2 starts at sector 0 (0x0)

*** ERROR: Partition 2 does not start immediately after partition 1

*** Restore complete
 

·
Registered
Joined
·
4,612 Posts
You are right you're pointing to the wrong file. You need to point to Showstopper&Replay30xximage3.02.rtv which is 300 megs in size. Use RTVPatch2.2.4 and answer yes to all questions when patching so you get memory saving large clusters.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top