AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
297 Posts
Discussion Starter · #1 ·
Hi!


I need to access the service mode on my RCA MM36110. My problem is that when I switch to progressive mode the image seems to be shifted to the left so I see a distortion on the left side border of the screen and the image doesn't touch the right side border.


So basically I need to manage image size and position when using progressive mode.


I will appreciate your help.


Edil
 

·
Registered
Joined
·
112 Posts
Edil,


Using the controls on the set, not the remote, hold down the MENU button then the POWER button at the same time. Then VOL+.


You should see P:0 V:0

Use VOL+ (you can use remote at this point) to change V:0 to V:76


From there you can use the CH+- and VOL+- to access and alter different values.


Try going to KeohiTV for a listing of some of the settings. As always write your settings down before changing anything.


Steve
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top