AVS Forum banner
1 - 2 of 2 Posts

1 Posts
Discussion Starter · #1 ·

So I work for a company that has stores across the country. We have digital signage setups in all of these stores. I am looking to find a new solution for our needs.

Our current setup:

1 - Thin Client PC - Either a Zotac, Asus or Acer. 

From the PC we have two different types of setups. The major run an HDMI cable into a 4 Port HDMI Spitter over Cat5/6. The outputs from the splitter is ethernet cable to an HDMI Receiver, which then runs a short HDMI run to the TV.

The ethernet runs range from 20-75ft. Anywhere from 2 to 4 TVS.

The other setup we have newly tried is a 4 Port HDMI Splitter with 100ft HDMI Cable runs straight to the TVs.

The splitters, receivers, and long cable runs have all caused many different problems.

Is there a better solution for getting media from 1 PC running an Xibo client to multiple TVs in a store?
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.