AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
1,005 Posts
Discussion Starter · #1 ·
Following the instructions led me to locking up SageTV and had to shut it down 3 times now. Everytime I get to the point of pressing and holding down the Satellite Box Remote controller for the expeected 2 minute wait it never does anything. I try to exit out of SageTV after 4 minutes and its hung.


hI think the instructions say to point the Remote Controller that came with the Satelite Box and not the hauppauge remote that I have programed for SageTV.

I have the IR receiver plugged into the back of the Hauppauge 250 card. I have the Act-IR200L plugged into the Com! serial port on motherboard. In BIOS it is activated and confirmed its COM1. Then I have the ACT-IR200L pointed 6" away from the IR receiver on the front of the satilitte box. Im using a brand new Hughes Silver Edition DirectTV sat box


Whatr could I be doing wrong?
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top