AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi everyone


I was wondering if anyone knows where I can find the default specs in Service mode for a CT32HL43 Panasonic 32" tv. I had it in for service for a bad transistor but now the picture is all fudged. They are coming back to look at it Saturday but I was curious if anyone that may have this tv can go into service mode and send me the default values...


To get into service mode:


Go into the menus and set the tv input to cable (mine already was so I went "tv" and then back to "cable"

Set the sleep timer to 30 mins

exit menus

Go to channel 124

On the remote turn the volume to 0 (zero)

then on the tv itself turn the volume to 0 (zero)

then you should see something on the screen that Says CHK...and a bunch of numbers...go to a channel you can see and then hit the power buttin on the remote, that will bring up the service menus and you can see the settings.


There are a bunch of settings to write down but I would greatly appreciate it.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top