AVS Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
336 Posts
Discussion Starter · #1 ·
Looking for suggestions for the following.


I've installed the screen by cutting out the sheetrock and hiding the screen assembly above \\ inside. The sheetrock cutout is roughly 6" x 94". Rather than leaving it exposed, I would be interested to know what other folks have done to hide the cutout.


I could probably have some sort of a cover made by using plastic \\ aluminum sheeting and trim which would be better to look at. Any suggestions here would be greatly appreciated.


Thanks...Rohit
 

·
Registered
Joined
·
1,800 Posts
I know some people have planned these recesses in advance and framed accordingly but you have several options. You could put up some sort of drop down trim to "hide" the area when looking from the front. You could also extend sheetrock vertically inside the 6X94 slot by installing some wood members and then gluing the sheetrock to it and finishing as high as you can see.


Brian
 

·
Registered
Joined
·
799 Posts
You could go soft by having some material skirt the opening.

You know a valance. jdb
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top