AVS Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
614 Posts
Discussion Starter · #1 ·
Hi:

Bought a brand new dish from dish depot and used for less than a week. When using it continiously for three to four hours fine. Turn it off and coming back half a day after, turn it on , no picture. Have to unplug and/or pull the card out, it will work. Decided to leave it on, next day, no picture again! Have to unplug and/or pull the card out before it will work!

When working, change to SD and turn it back to HD, no picture!

In menu, go to check signal strength, it unit will lock out with no picture. Have to unplug and/or pull the card out! Please help!






Alex
 

·
Registered
Joined
·
117 Posts
Well, I have two tips for you. The first is to try a reset rather than unplugging as it's quite a bit easier. To reset, hold down the power button on the front of the unit. It will turn off and then start flashing and then come up again. The second is to call tech support and talk to them. You may well have a defective unit.


Keith
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top