[Sprtsntx]

Great Site! The wall in which the screen will be placed is 8ft high and vaults inward to a height of 10 feet. The projector will be ceiling mounted 11-12 feet away from the screen. I'm looking at the Sanyo Z1/2 to project a 100" diagnal screen. I'm not sure how far down the screen should be from the beginning of the vault. Does the manual lens adjustment allow the projector to be slightly higher than the screen without using keystone adjustments? I'm concerned how far the projector will be hanging down in the room. Thanks

 

[Sprtsntx]

Can anyone assist with the Sanyo Z1 or 2's ability to adjust the lens vertically to avoid hanging the projector too low? Thanks again.

 

[cburbs]

I believe from some posts I read you can shift the lens vertically or horizontally...how much I don't know. This is a plus with the Z1 since many people have hard times with placement of the projector. Go here and look at the info for the manual: http://sanyoservice.com/osb2/showite...17&startrow=97

 

[Sprtsntx]

Thank You for your help. The answer to my question is that the projector has to be level with the top of the screen, otherwise without the uppermost setting on the lens adjustment the image would be projected on the vaulted portion of the wall. The visual diagram in the pdf file provided me with what I was asking. Thanks again