AVS Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hi Everyone


My Receiver has suddenly stopped out-puting picture through its HDMI output. Sound still works and the red light on the front is illuminated. Also my computer still recognises the make of the projector connected and appears to be allowing it as a second screen. No picture still on my projector. I have tried the projector as a direct link to computer and all is fine. I had been having some cable issues and have replaced. The end came off HDMI cable and some of the terminals touched I'm sure. Could this be the issue and if so how to fix.


Thanks in anticipation


Cheers Dan
 

·
Registered
Joined
·
15,079 Posts
HDMI audio and video are sent over the same pins of the cable. Audio is sent during the "vertical retrace interval" between video frames. Losing just the video suggests a video processor problem in the receiver.


Also, if your receiver has a "Pure Direct" option, make sure that's not enabled. That setting disables video circuits in order to minimize any possible interference when listening to high quality audio.
 
1 - 2 of 2 Posts
Top