AVS Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
88 Posts
Discussion Starter · #1 ·
hi,

im having this problem for ages. i have tried all possible drivers/decoder/renderers/etc and none of them works for me.


no synchonisation with display, as a result droping frames.

i use 9500GT videocard. if i set its output to 23Hz or 24Hz and go without reclock result is horrible on 23.97Hz movie, droping/doubling a frame every few seconds. if i use reclock, it happens at movie start every few seconds but then goes away and drops frame every 5minutes or so.

i have tried using CUDA decoder to be sure CPU is not loaded (under 10%) nothing helps. renderer reports frames is droped earlier in the chain.


the best result i can get is if i reclock movie to 25Hz and set video output to 50Hz, but still drops a frame sometimes.


can someone come up with any idea? anything.. feels like i have tried all besides throwing videocard out of window
 

· Registered
Joined
·
165 Posts
Hi miks


i used the gt9500 (gigabyte) for over a year (now using gt240) and never got problems


i use xbmc (windows) or mpc-hc (+reclock for automatic refresh change, using displaychanger )


and the automatic refresh was always set correctly. I NEVER go to change refresh to control panel


make sure you use latest nvidia driver, latest mpc-hc and latest beta reclock


BHH
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top