AVS Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
538 Posts
Discussion Starter · #1 ·
Hello all, I have a Onkyo 507 and I seem to have lost the ability to set my fronts to large or small. I have the other speakers listed. Ive tried pulling the power to power cycle and looked through the menu's. Is there a place where i can enable the fronts again? Sound comes out of them with no problem...

if it makes a difference im using Audissey. Thanks!
 

· Registered
Joined
·
9,818 Posts
Is a subwoofer connected to this receiver?

If the "subwoofer" setting is set to "No" then the fronts setting is fixed at "Large" in which it does not appear.


To Reset the A/V Receiver to its factory defaults: (see page 93 in OM)

Turn it on and, while holding down the [VCR/DVR]

button, press the [ON/STANDBY] button. “Clear”

will appear on the display and the AV receiver will

enter Standby mode.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top