AVS Forum banner
1 - 20 of 20 Posts

·
Registered
Joined
·
3,495 Posts
Discussion Starter · #1 ·
I've been wanting to come up with a ported design to get the most of my (2) ht18 d4 sub's and my inuke 3000dsp. I'm worried that I would mess up a horn. Knowing the inuke can give each driver 1100w what's the optimal box size and tune to use every bit of the power? The recent talk about inductance has me questioning if modeling the sub in winisd is very valid.

My only constraint is the foot print. Can be 20" wide by 24" deep and up to 8'tall.
 

·
Registered
Joined
·
21,345 Posts
here is another design that I don't think ever got built. kind of cool too.














if you can dream it up, we can probably figure out the size/port without much difficulty.


hope that helps get the creative juices flowing.
 

Attachments

·
Registered
Joined
·
3,495 Posts
Discussion Starter · #10 · (Edited)
Yep, I like my sealed 4cu flat packs, but I'm on concrete and my media area is an open plan, probably 8000cuft with no door to the first floor just an open staircase.

So I'm trying to figure out what to do that I can conceal as built in cabinetry.
 

·
Registered
Joined
·
5,970 Posts
1 - 20 of 20 Posts
Top