AVS Forum banner

1 - 20 of 73 Posts

·
Registered
Joined
·
308 Posts
Discussion Starter #1
Does anyone know the definition of the various HOx error codes for Panasonic DVD players? It's probably in the service manual. My RP-91 has started producing a couple of them (H03, H05) instead of playing DVD (no prob w/CDs though). I few searches here and on other forums indicates that there are a *lot* of people out there who've encountered these.


Thanks,

Steve
 

·
Registered
Joined
·
126 Posts
Steve,


Did you ever find out any more details on these errors? My RP-91 is now giving me an H05 error code all of a sudden. *sigh*


Thanks,

John
 

·
Registered
Joined
·
85 Posts
I have read that h02 is spindle. I have also heard h02 is optical pick up. I think its spindle, since the only time I get it is when the dvd isn't turning.


In addition, I was able to replicate the h05 when I was refocusing my pickup, so I think it might be an out of focus code, but not sure. Any one with any information would be greatly appreciated.


I guess if you are going to replace the spindle, you might as well replace the optical too. Thats just over 100 dollars in parts.


ack


patrick
 

·
Registered
Joined
·
1,991 Posts
If you go to the pansonic firmware update thread, and go to page 17 or 18, you'll find a few folks who have the RP91 service manual -- you mgiht PM them...


I'm thinking about ordering a copy of it for the fun of it. This was the response I got from Pansonic's service department:

Quote:
Our service manuals contain the schematics, as well as the parts listings. The service manuals for your model is available for $17.27. There is also a $3.00 shipping/handling fee with in the US, as well as your local taxes, attached to this order.


To place an order, please call 800 833 9626 (253-395-7343) or contact me with your shipping and credit card information.


I do not show a calibration disc. The service manual does list the available

test and service disc.


Thank you for your inquiry,

Lucia

National Parts Center
[email protected]

I've asked (yesterday) for part number and cost of the test and service disk. If I get a reply, I'll post it.


@ ~ $20, it seems like this will be a good buy.


Joe
 

·
Registered
Joined
·
2,143 Posts
ppm,


Actaully H02 is optical pickup and H07 is spindle. I don't know what H05 is thou. Even thou the disc doesn't spin and saying that it errors out, I believe that the laser is suppose to power up but since it failed, the disc didn't spin.


I remember my first RP-82 gave me H02 after just loading a disc in. After that I just exchanged my player for another one just before the 30 day exchange ended and ever since, more errors!
 

·
Registered
Joined
·
432 Posts
Not without a LOT more modification, if it were at all possible.


As I understand it, the bravo basically uses an off the shelf DVD-ROM drive.


Panasonic (and most stand alone players) uses custom loader mechanisms that don't really resemble a DVD-ROM drive at all. You'd have to manually remove the drive mechanics and transplant them - assuming they're even compatable.
 

·
Registered
Joined
·
283 Posts
Was just curious.. The bravo and momitsu dont use off the shelf loaders but you are able to put off the shelf loaders in them.
 

·
Registered
Joined
·
370 Posts
Anyone has more information on this? I just started getting an H05 error on my RP56 out of the blue. I load a DVD-R (burned on the E80), the RP56 tries to read it for a while and then it returns the dreaded H05. Is the player shot? Is it worth having it repaired? Would a firmware upgrade take care of this? Any advice will be greatly appreciated.
 

·
Registered
Joined
·
1,991 Posts
Send Sango a PM and ask him to respond on this thread -- he knows the ins and outs of repairing these units. I believe you need to replace the spindle motor.


Joe
 

·
Registered
Joined
·
10 Posts
Hello,


I have a portable Panasonic LS-50, which is giving me the H03 error code. After I put a DVD in, it tries to read the disc, but the DVD definitely does not spin at all.


A web search shows that this may be a "Traverse servo error". I don't know anything about player innards, but it doesn't sound the same as the spindle problems that seem so common (and this model is relatively new). Of course, since the disc does not spin, it just might be the same thing. I haven't read any similar issues with Panasonic's portable units.


Would spindle replacement help at all? Or is the traverse servo something completely different?


Thanks,

Marc
 

·
Registered
Joined
·
291 Posts
Anybody know if the Optical pickup/spindle motor assembly in the currently-selling Panasonic players are compatible with the one in the CP72 units?
 

·
Registered
Joined
·
1 Posts
I don't know if any of you are aware, but with my LS5 model of the panasonic portable dvd player the error codes could be solved by turning on your device, taking out any disk, closing the tray and pushing the back skip, pause, and play buttons at the same time. Hold for about 4 seconds and the screen will go blank then "initializing" will appear and your player will read your disks again. Hope this is helpful to someone
 

·
Registered
Joined
·
56 Posts
Lilmissmilies,


I'm want to buy a LS50 or LS90 but after reading reviews on amazon.com about the HO3 error message, I'm thinking about changing my mind.


Does your solution for the error message always work? The reviewers on amazon.com had to pay big bucks for servicing the DVD player.


Thanks!
 

·
Registered
Joined
·
1 Posts
I am also really interested in buying the LS50 but after reading the Amazon reviews I am worried. Could you please respond with whether holding down the three buttons at one time works everytime? Thanks!
 

·
Registered
Joined
·
56 Posts

Quote:
Originally Posted by piano2 /forum/post/0


lilmissmilies instructions worked-we just fixed the problem with our Panasonic DVD player - H02 error

thanks!!

Thanks for the feedback. It's nice to know how to fix it. I just purchased the DVD player and we took it on a 4 hour flight. It worked perfectly and the battery never failed. Great DVD player!
Thanks lilmissmilies for the fix!
 

·
Registered
Joined
·
10,821 Posts
IUf anyone has any trouble with their players in repairing or doesn't wish to undertake it, I offer a repair service for the failures of these Panny units and their clones, I posted a ad in the source components for sale area

http://www.avsforum.com/avs-vb/showthread.php?t=667008


the H02, H03, H04 and H07 errors are spindle related in my experience, the service manuals list these as spindle failures also, a optical failure is rare, it will usually be indicated by H05 and U11 and sometimes F506


Sango is correct in that H02 can be a optical failure, although I have never seen it


-Gary
 

·
Registered
Joined
·
1 Posts
fixing code H03is very simple but needs some courrage and small philips screw driver.

the problem arrise from the laser lamb which moves up and down the disk through a mechanical shaft

I do believe when we press the back space for long time it will take the laser lamb beyond its limit and get stuck at the end of the rotating shaft so the servo motor gets difficulty and resistance to get it back to tract

all you have to do is open the back of the LS50 " 12 small screws"
when you remove the back cover be carful not to damage the cables
.

you will find the servo motor and laser lamb on one metal structure hanged to the body by three rubber suspensions

remove the whole structre and turn it upside down slowly

move the small black rotating joints up or down you will notice the the mechanical shaft will start rotating and the laser lamb will start to move away from the servo motor relasing it from where it get stuck

and it will work perfect after that

return the back cover and screw the 12 screws and you are done
 
1 - 20 of 73 Posts
Top