AVS Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
170 Posts
Discussion Starter · #1 ·
I had my Panny CT-32HX41 modified with the addition of a rotation coil. The result is that the Geomagnetic adjustment will now rotate the picture approx. 5 degrees +/- to eliminate the tilted appearance. The MOD consists of adding the coil around the back of the PT and 2 additional parts. The models affected are CT-32/36HX41/C, CT-32/36SX31/C, CT-32/36HX40/C,CT-32SX30C. The affected chassis are DX2P, DX2C, NA8ML.

This MOD does not improve the pincushion problem, the curved lines at the top and bottom or the convergence.

The tech told me that convergence & geometry on direct view sets are marginal, at best, and most 'misses' are not adjustable as on RPTVs. Computer monitors have adjustments for these kinds of problems (save convergence) so what's the problem.

My next step is to give up which is what Panasonic wants me to do.

Hope this info helps someone.


------------------

Tom Taylor
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top