AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
259 Posts
Discussion Starter · #1 ·
I was looking for the service menu function for the Panasonic PT53WX53, specifically the 165 point digital convergence. The user menus only let you do 9 points. I found the information below.


Jason
 

·
Registered
Joined
·
259 Posts
Discussion Starter · #2 ·
I found this information and it seems to work an all sizes of CRT RPTV for Panasonic. The most useful is the COARSE and FINE convergence adjusments which let you adjust geometry andd posistion for green, then get the full 165 points including geometry for red and blue. There is also a useful bit of information on how to adjust focus on each color.


To access the service mode:


Make sure you are on Antenna A and set the mode to CABLE

Select TIMER in set-up and set SLEEP time for 30 Min.

Press Action or the UP Arrow to exit menus.

Turn to Channel 124

Turn VOLUME to minimum (0) with remote.

Press VOL ◄ (decrease) on TV. Red "CHK" appears in upper corner.

To exit the service mode


Press Action and Power on the TV simultaneously for at least 2 seconds.



Here is the link

http://www.panny.tv/sm.htm


Jason
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top