AVS Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I've connected my PC (ati x1300 radeon-dvi output...dvi->hdmi adapter) vith my LCD TV via HDMI repetaer. I've placed repeater between, because of the whole length (6m of HDMI cable) so instead, I used two 3m HDMI cables and a hdmi repeater.Well, it doesn't work. There is no picture on my TV. If I make a connection without HDMI repater, it works. Is the problem in HDCP? my graphic card is not HDCP capable.
 

·
Registered
Joined
·
735 Posts
I use a HDMI over CAT 5 device and it works, I go about 100'

see my post about a weird side effect I am getting

i am using ATI radeon 2600 XT
 

·
Registered
Joined
·
37 Posts
Sounds to me like the repeater is causing an issue. If you are using the repeater because you already had 2 of the 3m cables, then I understand what you were trying to do. But, 6m of HDMI cable should be no problem from your PC to TV, therefore no repeater required. You can also just buy a female-female HDMI coupler to connect the two - 3m cables.


Repeaters are to be used for long runs, and you do not have a long run
 
1 - 3 of 3 Posts
Top