AVS Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3,101 Posts
Discussion Starter · #1 ·
My planar PD7060 was working fine. Has only 5 hrs.

Today when I turned it on the lamp didnt turn on. The fan

runs but the lamp wont turn on. The light is also blinking.

I checked the manual and there is nothing mentioned regarding

blinking light.

Any idea if this is an indication of dead bulb.

Thanks
 

·
Registered
Joined
·
16,859 Posts
Probably a dead lamp but pull it out and re-seat it just to be certain ( obviously be sure to unplug the PJ while doing this ) . Hope it is still under the 90 day lamp warranty if you got in on the special blowout deal
.


- Jason
 

·
Registered
Joined
·
2,241 Posts
I had an accidental "quick cycle" power the other night, ( hit the off button in the dark while doing some menu tweaks..). I wasn't quick enough to hit the on switch before it went off... Mine went to the same kind of issue you are describing. I remembered the owner's thread and some of the fan issues...I unplugged the Proj....waited for a few moments, plugged in re-powered, all was well....

Give that a shot first.
 

·
Registered
Joined
·
3,101 Posts
Discussion Starter · #4 ·
I will try that.


I got the PJ only in December. I thought the Planar lamp warranty is 180 days. Is it 90 days or 180 days?


I also like to know if the Planar lamp warranty is transferable. i.e the manufacturer's lamp warranty.


Thanks
 
1 - 4 of 4 Posts
Top