AVS Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
43 Posts
Discussion Starter · #1 ·
does any body know how big the power plug is for for

panasonic th-42pwd6uy

i would like to know how big i have to make the hole

in the wall for it plus all the other cables
 

·
Registered
Joined
·
109 Posts
It is against electrical code to run a power cord or extension cord through a wall. You need cut a 1 gang box into the wall behind the screen and run romex from that box through the wall to a nearby outlet and tap into that. It is also best to install a recessed clock outlet in your 1 gang box because standard outlets usually don't allow enough room for your plug behind the display.
 

·
Registered
Joined
·
258 Posts
Not to advocate electrical code violations... but the power connector is the same as a standard computer or computer monitor power connector. There's also what I assume to be a built-in ferrite core about 4-5 inches from the display end of the cable that's about 7/8" in diameter.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top