AVS Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter · #1 ·
Hey guys,


Just bought me an Onkyo HTX22HDX 2.1 next month will buy the upgrade speakerset 5.1


Now I have my HTPC and Dune HD mediaplayer plugged in the Onkyo AV HDMI 1 and HDMI 2 in and HDMI out to my HDTV.


My question is by connecting via mine Onkyo AV to mine HDTV will there be any PQ loss, or will the PQ remains the same as mine HTPC and Dune HD was connected straight to the HDTV before.


As I don't see any difference to be honoust, the PQ looks sharp and clear as it before in this case when it was connected to mine HDTV without the AV.


Hope to hear from you guys.

Thanks in advance.


Here are the specs of the Onkyo HTX22HDX :

Product Type:


Home theater system

Dimensions (WxDxH) / Weight:


Speaker system : Right/left channel speaker : 4 in x 4.4 in x 6.3 in / 1.8 lbs, 8.5 in x 12.2 in x 13.3 in / 20.9 lbs

Enclosure Color:


Black

Audio System

Components:


AV receiver, Speaker system, Subwoofer

Sound Output Mode:


Surround Sound

Built-in Decoders:


Dolby Digital Plus, DTS-HD High Resolution, DTS-HD Master Audio, Dolby TrueHD

Audio D/A Converter:


24bit / 192kHz

Surround Sound Effects:

Theater-Dimensional Virtual Surround

Sound Effects:

CinemaFILTER

Digital Sound Processor (DSP)

Yes

DSP Preset Qty

4

DSP Presets

Action, Sports, Role Playing Game (RPG), Rock

Signal-To-Noise Ratio

105 dB

Amplifier Output Details:


25 Watt - 6 Ohm - THD 1.0 % - 5 channel(s) ( Surround ), 50 Watt - 3 Ohm - THD 1.0 % - 1 channel(s) ( Subwoofer )

Additional Features:

Compressed music enhancer

Signal Processing Features

HDMI Switching:


Yes


HDMI Pass-Through:



Up to 1080p

Connectors:


Coaxial Digital Input


Yes

Optical Digital Input:

Yes

Speaker System


Speaker(s)

2 x Right/left channel speaker - External - 70 - 20000 Hz - 6 Ohm - Wired, 1 x Subwoofer - 50 Watt - 35 - 200 Hz - 3 Ohm - Wired


Driver Details


Right/left channel speaker : 1 x Full-range driver - 80 mm, Subwoofer : 1 x Subwoofer driver - 160 mm


Audio D/A Converter

24-bit/192 kHz


Remote Control

Yes

Connections:


Connector Type

1 x HDMI output ( 19 pin HDMI Type A ) - Rear, 3 x HDMI input ( 19 pin HDMI Type A ) - Rear, 2 x SPDIF input - Rear, 1 x SPDIF input ( RCA phono ) - Rear, 2 x Audio line-in ( RCA phono x 2 ) - Rear, 1 x Remote control - Rear, 5 x Speakers output ( Click-fit x 2 ) - Rear
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top