[RobertR]

I don't see the card when I turn on the projector. What input should it appear as?

 

[Gary Murrell]

you must turn on the PJ with the unit set to default to the slot the card is inserted in


when you turn the PJ on make sure the HDMI/DVI device connected is turned off, about 10 seconds after powering on the PJ turn the device on that is connected to the card, otherwise you get no image


-Gary

 

[RobertR]

Thanks Gary.

 

[RobertR]

Ok, I have a followup question. I was able to get a picture from my Directv receiver with no problems, but nothing with a Toshiba HD-A1. The player freezes up. Do I need to upgrade the Toshiba firmware?


Edit: Yes I did.

3.0 is working fine.