AVS Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
78 Posts
Discussion Starter · #1 ·
I have a motorola dct 2224 cable box and i am having trouble getting it to change channels properly.Many times it will change to the wrong channel either missing the first digit and sometimes the last.Does anyone know of a code that works best with this box with proper settings?would be appreciated
 

·
Registered
Joined
·
4,546 Posts
Enable Fine Tuning: Yes

Codeset: 4476 (if this doesn't work try 0476)

Send Enter: Yes

Minimum digits to send: 0 (try changing this to 3 if you have problems)

Inter-action delay: 0100 ms

Response delay: 1500 ms (increase this number if the blue screen still shows up)

Pre-command delay: 0000 ms

Inter-Command delay: 0100 ms
 

·
Registered
Joined
·
148 Posts
lizard boy..how do i get to those options on a 5040?
 

·
Registered
Joined
·
744 Posts
I'll field this one:


Under Menu-->Setup-->Network and Input settings


Navigate through the menus to enter in the IR blaster code for your particular box. Once at the list of code, press ZONES on the remote while highlighting your particular code and you will be taken to the fine tuning screen.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top