AVS Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
78 Posts
Discussion Starter · #1 ·
This projector has worked for years. I see I posted with a problem here in 2009 so it has worked for at least that long with the same setup.

Today the projector did not recognize the hdmi input. Nothing changed in my setup but just to check I tried different things. I tried a different cable from a known working non DHCP source (a computer). That source played into a computer monitor on DVI so I know there was a signal there. I tried the PC-VGA input form my laptop and that worked.

Any ideas on what I might have missed? Anyone have this problem and fix it?
 

·
Registered
Joined
·
78 Posts
Discussion Starter · #2 ·
OK, all is fixed. The projector was set to not auto select inputs, which is fine as we only use HDMI but for reasons unknown the input was set to PC. The remote has not been out of the drawer for years so I have no idea how that happened. But it works so I will leave this post here in case the same thing happens to someone else.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top