AVS Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
121 Posts
Discussion Starter · #1 ·
I was looking at a few options on how I should set up these subs. The subs will be CSS SDX-15s, each in its own box. The amp will be a EP2500. What I am wondering is will it be better on the amp to run it with the 2ch @ 1200w @2ohm or the bridged setting @2400 @ 4ohms. I can wire the vcs to work each way. Thanks in advance.....
 

·
Registered
Joined
·
214 Posts
So you are using two SDX-15's? The SDX is a dual 2 ohm voice coil sub, therefor each sub can be run at 4 ohms or 1 ohm. With two you can run them at 8 ohms, 2 ohms, or 0.5 ohms. But it looks to me like you have one SDX-15 and are wondering whether to run one channel per voice coil or to wire both coils in series first? If it is just one sub there is no difference as long as both channels on the amp are getting the same signal. It is easier to wire the voice coils in series first so you only use one input on the amp.
 
1 - 3 of 3 Posts
Top