AVS Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
53 Posts
Discussion Starter · #1 ·
Has anybody used this combination using the 5-wire rgbhv input? if so what is your setup. Please include details. My E*6000 was great with my Barco except that I can't get the 61.5 satelite and finally switched to D* out of frustration. If anyone from dish is reading this I would have stayed if hdtv was on 148.

Thanks


------------------

Brian
 

·
Registered
Joined
·
50 Posts
Brain B

I am using the DTC-100 with my Barco 800 you need a box that will change the sync poliarty to something that the barco will like. I am using an Altinex which break the DB connector out to 5 BNC's and feeds the correct sync poolarity to the Barco.


Either Altinex or Extron Makes units that wil do this
 

·
Registered
Joined
·
53 Posts
Discussion Starter · #3 ·
Thanks, I already have a extron rgb-120. Will this do the job? I thought I read that it will, but a rep from extron says that it won't accept a interlaced input. any ideas?


------------------

Brian
 

·
Registered
Joined
·
1,598 Posts
I have used the RCA with a BG 800. It required an inverter on the sync lines since the RCA outputs positive sync and my Barco need negative sync.

John
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top