[syvmn]

I bought an Onkyo TX-RZ730 and I would like to use the extra two channels via pre-out for a 7.2.4 system. I am not having much luck searching the forums for recommendations for something inexpensive. Maybe $100 plus or minus. Thanks for any help.

 

[afrogt]

Most often recommended amp to expand to 7.2.4 are the Audiosource and Dayton stereo amps
https://www.parts-express.com/dayto...-d-stereo-60-wpc-bluetooth-amplifier--300-593

https://www.crutchfield.com/S-o5aZ5...MI8pHRn-H54wIVgcBkCh2lIwtlEAYYASABEgLOMfD_BwE

 

[eriksells916]

yup ^^^^^^^^^^^^^^^^^ what he said

 

[Trunksleo]

If i use the main in, i cant use the analog inputs of that amp?

 

[bobknavs]

If i use the main in, i cant use the analog inputs of that amp?

Sorry, I don't understand. Can you clarify?

 

[Trunksleo]

Sorry, I don't understand. Can you clarify?

sorry i dont see the back of the amps.

 

[afrogt]

If i use the main in, i cant use the analog inputs of that amp?

the Main In on the amp is analog. I don't understand what you're trying to say.

 

[pase22]

sorry i dont see the back of the amps.

The recommended amps are compatible with your AVR. You should have no trouble integrating it into your system.

 

[RayGuy]

This is a steal (on close-out?):

https://www.amazon.com/Cambridge-Audio-Stereo-Integrated-Amplifier/dp/B078H7ZP8T?SubscriptionId=AKIAILSHYYTFIVPWUY6Q&tag=duckduckgo-d-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B078H7ZP8T

You won't find better quality at that price point.

 

[Trunksleo]

The recommended amps are compatible with your AVR. You should have no trouble integrating it into your system.

My question is if i can turn on/off the yamaha rs700 and the marantz 5012 with the same control.

 

[bobknavs]

My question is if i can turn on/off the yamaha rs700 and the marantz 5012 with the same control.

That would be best done with a 12V trigger. It appears that neither receiver has a 12V trigger input.

Short answer: not directly. You could resort to something like a smart power strip (where one outlet controls the others) or a power switch that takes a 12V control.

Is there any reason that you didn't mention the RS700 nd the SR5012 in your first post? No telepaths here, as far as I know.

 

[Trunksleo]

That would be best done with a 12V trigger. It appears that neither receiver has a 12V trigger input.



Short answer: not directly. You could resort to something like a smart power strip (where one outlet controls the others) or a power switch that takes a 12V control.



Is there any reason that you didn't mention the RS700 nd the SR5012 in your first post? No telepaths here, as far as I know.

Thanks. I just answered that i dont see the back of the amps. I dont saw that amp dont have any inputs

 

[pase22]

My question is if i can turn on/off the yamaha rs700 and the marantz 5012 with the same control.

Unless you're using these for a different setup, You don't need anything else