AVS Forum banner
Status
Not open for further replies.
1 - 10 of 10 Posts

·
Registered
Joined
·
831 Posts
Discussion Starter · #1 ·
1. Ensure disc tray is empty.

2. Ensure player is turned on.

3. Press "Repeat" on the R/C then enter 5,7,5,3,8

4. The numbers "02" appear in the top left of the screen.

5. Quickly press the number "9" button on the R/C, for "multi region".

6. Wait 20 seconds, then power off, then on again.
 

·
Registered
Joined
·
1,156 Posts
Is this "safe" to do or can one screw up their DVD player if they attempt this and make a mistake?


Is it possible to revert back to region 1 only after doing this?


Peace...
 

·
Registered
Joined
·
1,716 Posts
ConceptVBS,


If you have done this, how's the upscaled component picture for other-region DVDs? Will it convert PAL to NTSC?
 

·
Registered
Joined
·
104 Posts
I tried but did not worked. I did not see the "02" numbers after entering 5,7,5,3,8. Looked on the back and mine was manufactured in 04/2003.
 

·
Registered
Joined
·
1,716 Posts
bump...
 

·
Registered
Joined
·
104 Posts
Search the web and have not found any mentions for this hack. We will just have to wait for ConceptVBS to come back from vacations.
 

·
Registered
Joined
·
95 Posts
I saw this hack posted on a message board as well and it did not work for me either. My firmware is 6/2003. I looked some more, and there was another page with a few different number combinations to try but none of those worked as well. And another website had the Samsung 931 listed but stated that there were no hacks for it yet.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top