AVS Forum banner
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
383 Posts
Discussion Starter · #1 ·
Hi all

How do you remove the c drive from the PJ?

Wayne
 

·
Registered
Joined
·
4,018 Posts
Take out 3 screws on the aluminum heatsink plate, disconnect all the cables, and carefully angle the whole thing out towards the rear of the projector.


Marc
 

·
Registered
Joined
·
7,137 Posts
I think I know why you're asking:


I tried to do this with a 9PG for a local friend here, and it was an absolute b!itch with the thing ceiling mounted! One of the neckboard heatsinks was in the way and we simply couldn't get the darned thing out no matter how you'd twist it or angle it. Ran out of time and finally gave up, but it almost seems like the other Drive card right beside it would have to come out first in order to give the C-drive enough room to twist out.


Kal
 

·
Registered
Joined
·
4,018 Posts
That's odd, I never had trouble with that. You do have to get your hand in there to push the big ribbon cable out of the way a bit. But It's never been difficult to do.


Marc
 

·
Registered
Joined
·
6,125 Posts
It's doable, I found that ribbon cable to be a ***** when I was having trouble getting used to my damaged right hand. Be carefull not to disturb any other cables while trying to work it out.


Chip S.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top