AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Premium Member
Joined
·
2,084 Posts
Discussion Starter · #1 ·
Anyone using a Sony HD100 and a Panny Showstopper with the serial cable? Does it work in controlling the HD100?


Also is anyone using the Panny Showstopper with the Panny TUHDS20 and a IR connection?
 

·
Registered
Joined
·
3,286 Posts
I have an HD-100 and a ReplayTV model 2004, and use the serial port control.


For the Replay to record off the HD-100, you do need to have the HD-100's "output select" set to "Video 1/2 480i." If you leave the HD-100's output set to component or VGA, your ReplayTV will get a "no signal" message instead of what you wanted to record.


The way I get around this requirement is, every show I have the ReplayTV set to record from the HD-100, I also select that program in the HD-100's channel guide and pick "Timer and Record." This automatically selects the "Video 1/2 480i" output at the beginning of the program.


Of course, when I want to watch something in high definition later on, I do have to switch the HD-100's output select back to "Video 3 Variable" again...




------------------

Robert Simandl ... somewhere near St. Louis

[email protected]
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top