AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
18,924 Posts
Discussion Starter · #1 ·
Ok, so I got around to hooking up the discrete outputs to my receiver-


I only have a 5.0 setup because I can't have a sub (apartment).

So, I set the Revo speaker setup for 5.0- Set the front speakers for large, the center/rears for medium-


Do I want to turn bass management on or off? I imagine I want to keep it off because I want the full bass sent to my front speakers- it's trying to set crossover frequencies for the medium speakers (80Hz), but I should keep crossover OFF as well?


Just how exactly does the Revo handle bass without a sub, and how should I set my speakers accordingly?
 

·
Registered
Joined
·
134 Posts
You got it about right.


You want bass management on, but no crossover on the front speakers (set to large). Crossover at 80Hz for your medium sized speakers. Since you have no sub, low frequencies will be sent to the large speakers (your front).
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top