[Damonb10]

I know that RG6 is required throughout the home for digital cable (and broadband internet). However, from the wall jack to the actual device (cable box or cable modem), is RG6 coax required? Or, is RG59 okay?


Thanks

 

[RandyWalters]

Quote:

Originally posted by Damonb10 I know that RG6 is required throughout the home for digital cable (and broadband internet). However, from the wall jack to the actual device (cable box or cable modem), is RG6 coax required? Or, is RG59 okay?

I don't know about the cable modem, but it is ok to use an RG59 cable from the wall to the cable box. However, i've found RG6 to give a better picture than RG59 whether it be a patch cable between the wall and cable box or in the wall itself.


I've improved my picture by using a good screw-on RG6 patch cable to replace the old push-on RG6 cable. The screw-on connector doesn't cause signal loss like the push-ons do.

 

[hometheaterguy]

When it comes to pre-wiring your home for the future or in your case just patch cable after the outlet plate you should select the best grade of Coax cable you can buy today. The standard used today for home needs is "Quad-Shielded RG6" or RG6QS. This type of Coax cable is superior to the older RG58 and RG59 Coax cable standards used years ago. It is thicker in appearance and will produce a better quality picture in most cases and much better sheilding againsts hum.

 

[mudder]

IMHO it probably won't make that much difference over the short distance from wall jack to tv. You should try to use rg6 if possible. Why take a chance with such a simple thing?