AVS Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
103 Posts
Discussion Starter #1
How connect the plv-60 by the input rgb for pc?

is it possible or not and how make this.

And what is the best of inputs rgb or s-video.

and if for pc not is possible,how connect this from dvd(or satellite) euroconector to 3 inputs r g b in the projector.
 

·
Registered
Joined
·
111 Posts
The plv-60 has a D-15 connector that matches the monitor connector of a pc. The plv-60 has several automatic pc modes e.g. 1024x768. These generally fill the center of the screen with black bars on the side.


Just takes a normal monitor cable. This forum had a long thread on using cat-5e (shielded ethernet) cable for long runs (40 feet) from source to projector.


As for what input to use, RGB and component are considered better than s-video which is better than composite.


Can't answer the last question. You might look in the DVD forum.


Frank
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top