AVS Forum banner

1 - 9 of 9 Posts

Registered
Joined
865 Posts
Discussion Starter · #1 ·
ok, so rookie mistake... I made a bunch of groundplane measurements, but forgot to load the 0 degree cal file, and measured with the 90 degree cal file...

any way to retroactively apply the proper calibration to the measurements I already have? I won't be hauling things back out to re-measure unfortunately...
 

Registered
Joined
11,876 Posts
I believe REW has the ability to change the mic-cal per measurement after the fact. But I could be wrong.
3119738

Just press the change cal button and select the correct cal file.
 

Registered
Joined
865 Posts
Discussion Starter · #8 ·
I believe REW has the ability to change the mic-cal per measurement after the fact. But I could be wrong.
View attachment 3119738
Just press the change cal button and select the correct cal file.
I did this and it seemed to work... as previously mentioned it doesn鈥檛 make much difference in the bass region
 
1 - 9 of 9 Posts
Top