AVS Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
OK OK, yes I searched, but it seems there is a ton of information out there, and nothing conclusive. Hey, maybe that's the answer




So I got the 10 blinking LED. Nothing unusual, it just shut off.


Tried doing the reset, but I get no clicks, and the LED actually stops doing anything at all.

If I unplug and let sit, it'll go back to the 10 blinks.



I got the back panel off, and tested continuity/impedance on all the big yellow and black thingies (that's a technical term) on the P board. Everything checks out OK.

Took the A board out and went to test it - then realized I didn't know WTH i was testing for.


So now I'm at a roadblock. The A-board for this TV is NOWHERE to be found, sold out/discontinued everywhere. I wish I could pinpoint a cap or resistor or something, at least I would have some shimmer of hope.




Any suggestions?? I need help!
 

·
Registered
Joined
·
988 Posts
Unplug the SC/SS boards from the P board.

If you get 6, 7 or 8 blinks, then the fault is with SC or SS. Otherwise it is with the A or P board.
 
1 - 2 of 2 Posts
Top